The Metallica Gate

Closely spaced wire lets air flow through and allows visibility but is too narrow for fingers, toes or hand tools. The anti-scale properties combined with being very slow to cut make 358 the ultimate security mesh infill for fencing and infrastructure. The Metallica has double vertical wires making it stronger and more rigid than other brands and is hot dip galvanised after welding to maximise corrosion performance.

358 mesh sheets are available ex-stock in 2.4 or 3.6m high x 2.2m wide. These can be used to make all sorts of custom enclosures or infill panels. We can also supply posts, rails, brackets and fixings in kitset form for construction on-site. All ex-stock. Pedestrian gates and driveway gates will be made to the size of your opening in our fabrication department. Typical lead times are 2-3 weeks.

Features:

1. Lasts longer than timber
2. No warping or fading
3. Smooth finish and clean minimalist look

Applications:

1. Landscape fencing
2. Infill panels on block walls
3. Balustrade compliant - When there is a drop of over 1m, panels are required to be balustrade compliant and be supplied with a producer statement to confirm it. The 1.0m high and 1.2m high Orbison panels are balustrade compliant at 1.2m wide (half normal width) and require 65x65 square posts.
4. Pool fencing compliant at 1.2m high.
5. Slide, Swing and Cantilever Gates and custom panels also available made and priced to order.

[custom tab]

Gates are made to order in our Silverdale factory. The table below shows our standard sizes. Larger sizes require an engineered solution and may require extra strengthening in the frame, special hinges or wheels etc. Please call us to work through your requirements.

  Download PDF Product Guide

Type	Opening Width	Frame Details
Pedestrian	1.2m opening	Hot dip galvanised steel 60x60mm frame with 358 mesh infill
Swing	Up to 4m single swing, 8m double	Hot dip galvanised steel 75x75mm frame with with 358 mesh infill
Sliding	Up to 12m	Hot dip galvanised steel 100x100mm bottom rail and 100x100mm sides and top with 358 mesh infill
Cantilever	Up to 8m	Hot dip galvanised steel 100x100mm bottom rail and 100x100mm sides and top with 358 mesh infill
Cantilever	8m to 12m	Hot dip galvanised steel 150x100mm bottom rail and 100x100mm sides and top with 358 mesh infill

[/custom tab]